Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Repair Across Roanoke
Chimney repair in Roanoke typically costs $450-$2,800 depending on whether you need mortar repointing, a partial rebuild, or full chimney restoration, and our Chimney Repair team completes most jobs in a single visit with upfront pricing agreed before we start. We’re familiar with the valley’s cold-air drainage, the Victorian brick stock in Old Southwest and Grandin Village, and the particular failure modes that come from 140-year-old chimneys that have cycled through coal, gas, and back to wood. If you’re seeing spalled brick, crumbling mortar, or water staining on your ceiling near the chimney breast, call (540) 787-3302. A live person answers 24 hours a day, and we’ll schedule a Level-2 camera inspection that ends with photos you can see and a plain-English verdict.
Why Hearthstone Chimney Co. Is Roanoke’s Preferred Chimney Repair Company
We’ve been answering the phone with a live person for over 42 years. That matters in Roanoke, where homeowners in South Roanoke and Wasena tell us they’ve waited days for callbacks from one-truck operators who never show. Our background-checked, uniformed technicians dispatch from our Washington, DC coordination office and serve Roanoke with the same schedule reliability we’ve built our reputation on since 1984.
The 90-Day Done Right Promise governs every repair we make in Roanoke: Krafted right, Every time, Your home first, Standing behind it. If it’s not right, we come back. In writing, no arguing. No paperwork chase.
Our Level-2 inspections document what we find the way an engineer would, then we explain it the way a craftsman would. You see the spalled tile, the eroded mortar joint, or the offset flue connection on the monitor before we recommend any work. That transparency is why Roanoke homeowners who have been burned by contractors before tend to stay with us.
Most repairs are completed in a single visit. The number on your estimate is the number on your invoice. A square deal: no surprises on the bill.
Our Chimney Repair Services in Roanoke
Mortar Repointing
The freeze-thaw cycles in Roanoke’s valley bowl hit hard. Water gets into eroded mortar joints, expands overnight when temperatures drop below freezing, and opens gaps that let more water in. In Grandin Village’s 1920s bungalows and Old Southwest’s Victorian row houses, we’ve repointed chimneys where the original lime mortar has turned to sand. Our repointing matches the original mortar composition and profile, not a quick tuck with Portland cement that traps moisture and accelerates deterioration. Typical mortar repointing in Roanoke runs $850-$1,600 for a standard single-flue chimney.
Spalling Brick Repair
Spalling - the flaking and crumbling of brick faces - is what we find most often on chimney shoulders and crowns in Wasena, where south-facing exposure drives rapid thermal cycling. Once the hard-fired face of a brick spalls off, the softer interior absorbs water like a sponge. We cut out spalled units, match replacement brick for color and hardness, and address the moisture source that caused it. Partial spalling repair in Roanoke typically costs $650-$1,400.
Chimney Waterproofing
Roanoke’s geography channels cold air drainage off the Blue Ridge and Allegheny ridges onto the valley floor, extending the freeze-thaw season well past what Piedmont cities experience. That makes waterproofing critical. We apply vapor-permeable sealers that let the chimney breathe while shedding water, never the film-forming coatings that trap moisture inside. For chimneys with existing moisture damage, we often pair waterproofing with Chimney Cap & Crown - Roanoke resurfacing using professional-grade materials. Chimney waterproofing in Roanoke runs $400-$900 depending on accessibility and surface area.
Flashing Repair
Step flashing and counterflashing around chimney penetrations fail predictably in Roanoke’s older housing stock, where original galvanized steel has rusted through or where previous repairs used caulk instead of proper metalwork. We fabricate custom flashing to match your roof pitch and cladding, sealed with high-temperature sealant at the masonry interface. Flashing repair in Roanoke typically costs $350-$750.
Chimney Rebuilding
When spalling, mortar loss, and structural cracking have compromised the stack above the roofline, partial or full rebuilding becomes necessary. In Old Southwest, we’ve rebuilt Victorian chimneys that lost their crowns entirely to decades of moisture intrusion, always salvaging original brick where sound and matching replacement units where needed. Chimney rebuilding in Roanoke ranges from $2,200 for a partial rebuild to $4,500-$7,800 for a full stack reconstruction with new Chimney Liner & Rebuild - Roanoke installation.
Tuckpointing
For chimneys where the mortar joints are sound but the aesthetic finish has weathered, tuckpointing restores the clean, narrow joint lines that define historic masonry. We use this sparingly and honestly - it’s a finish technique, not structural repair, and we’ll tell you when repointing is what you actually need.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Roanoke
We work exclusively with professional-grade materials from HeatShield, Gelco, Olympia Chimney, and Famco - including Duraflex service in Roanoke - no builder-grade substitutes. For Roanoke homeowners, that means we stock liner components, caps, and crown resurfacing materials that match your chimney’s specifications, so we’re not ordering parts and making you wait. HeatShield’s cerfractory flue liner resurfacing system, for instance, lets us restore a cracked clay tile liner to ASTM compliance without a full tear-out, which matters in Old Southwest’s tight flue configurations where a stainless steel liner sometimes won’t fit the original wythe dimensions. When we recommend a product, it’s because we’ve installed it, watched it perform through Roanoke winters, and trust it to hold up.
Common Chimney Repair Problems We See in Roanoke Homes
- Wood burned in a capped or never-converted Victorian coal flue. In Old Southwest, we regularly open multi-flue chimneys and find homeowners burning wood in a flue that was capped when the coal furnace was decommissioned, with no clay liner or a liner that cracked decades ago. Creosote stages on the unlined breech, and the homeowner never sees the third-degree glaze until a camera goes in.
- Shared wythe between wood and gas flues. Original Victorian multi-flue chimneys sometimes have a cracked terra-cotta liner section that lets flue gas migrate between adjacent flues. We’ve found active gas appliance liners sharing a wythe with wood-burning flues where the separating tile has failed - a situation that can press carbon monoxide into living spaces.
- Eroded mortar and spalled brick from valley freeze-thaw. The Roanoke Valley’s extended cold season means more heating days, more moisture cycling, and more freeze-thaw damage to chimney crowns and shoulders. Original 1880s-1920s brick with eroded mortar joints lets valley moisture drive deterioration the chimney cap was supposed to stop.
- Chimney crowns cracked and pitched wrong. Many Roanoke chimneys have concrete crowns that were poured flat or with inadequate overhang, so water pools and migrates straight down into the flue. We resurface with proper slope and drip edges, or rebuild entirely when the crown has deteriorated past saving.
Pricing for Chimney Repair in Roanoke, VA
Here is what chimney repair costs in Roanoke’s market, based on the jobs we complete here:
| Service | Typical Range in Roanoke |
|---|---|
| Mortar repointing (standard chimney) | $850 - $1,600 |
| Spalling brick repair (partial) | $650 - $1,400 |
| Chimney waterproofing | $400 - $900 |
| Flashing repair | $350 - $750 |
| Partial chimney rebuild | $2,200 - $3,800 |
| Full chimney rebuild with liner | $4,500 - $7,800 |
| Level-2 camera inspection | $250 - $350 |
What moves the number: accessibility (steep roof, tight alley, height), extent of damage found during inspection, and whether the flue requires relining or repair in addition to masonry work. We agree on a flat price before booking. The number on the estimate is the number on the invoice. Call (540) 787-3302 for a free estimate - we’ll inspect, show you what we find, and quote accordingly.
We Also Serve Cities Near Roanoke
Our crews work throughout the Roanoke Valley and beyond, including Chimney Repair in Roanoke proper plus Vinton, Salem, Rocky Mount, and Bedford. Scheduling is coordinated from our Washington, DC office, with local technicians dispatched to your home. Same standards, same 90-Day Done Right Promise, same upfront pricing.
Serving Roanoke, VA - Our Local Coverage Area
We’re based in the Roanoke area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Repair in Roanoke
Your second flue likely served a coal furnace that was later capped or converted to gas, leaving a terra-cotta liner that was never designed for wood combustion. In Old Southwest, we regularly find homeowners have unknowingly burned wood in these capped flues, or that a previous owner modified the thimble without proper relining. A Level-2 camera inspection shows exactly what each flue contains and whether it’s safe for your intended use. Call (540) 787-3302 for an exact quote - estimates are free.
Yes. Most dangerous chimney conditions are invisible from the outside. We’ve found third-degree creosote glazing, cracked liner sections, and offset flue connections in chimneys whose brickwork looked sound from the roof. Our Level-2 inspection documents what we see with photos you can view, then we give you a plain-English verdict. Nothing is recommended without camera evidence. Call (540) 787-3302 to schedule - estimates are free.
Roanoke’s bowl-shaped valley traps cold air draining off the Blue Ridge and Allegheny Mountains, pushing January lows lower than Piedmont cities at comparable elevations and extending the active heating season from October through April. More burn days mean more creosote accumulation. Annual Chimney Cleaning & Sweep - Roanoke is a practical necessity here, not a cautious suggestion. Call (540) 787-3302 to schedule - estimates are free.
Not necessarily. Spalling limited to the crown or upper courses often resolves with targeted brick replacement, repointing, and waterproofing. We only recommend rebuilding when structural integrity is compromised or damage extends through multiple wythes. The camera and physical inspection determine which; we show you the photos before proposing any scope. Call (540) 787-3302 for an exact quote - estimates are free.
No. A cracked clay tile liner can allow heat, sparks, or flue gases to reach combustible framing or to migrate into adjacent flues in a multi-flue chimney. In Roanoke’s Victorian housing stock, we’ve seen cracked liners sharing a wythe with active gas appliances, creating a carbon monoxide pathway. We can often restore the liner with HeatShield cerfractory resurfacing or install a stainless steel liner, but continued use without repair is not safe. Call (540) 787-3302 for an exact quote - estimates are free.
Schedule Your Chimney Repair in Roanoke
Whether you’re seeing water stains, spalled brick, or you’ve just moved into an Old Southwest Victorian and want to know what you’re working with, we’ll inspect, document, and explain before recommending anything. Our 90-Day Done Right Promise covers every repair. Calls are answered by a live person 24 hours a day, 7 days a week - not a voicemail, not a callback queue. Senior and veteran discounts apply. Call (540) 787-3302 for your free estimate.
Written by Russell Haines, Owner at Hearthstone Chimney Co., serving Roanoke and the surrounding valley communities since 1984.